Important Tips for Effective Commercial Cleaning

Pressure washing for commercial properties is an important maintenance task. This ensures that buildings, surrounding areas, and even the air are clean and safe. Businesses in Atlanta and other cities where cleanliness and appearance can affect customer perceptions are more likely to benefit from pressure washing. These are a few essential tips for pressure washing commercially, especially for the Atlanta market.

Fundamentals Of Pressure Washing

Pressure washing Atlanta uses high powered water jets in order to remove dirt, mold, mildew, stains, and other contaminants. This method is effective in cleaning the exterior of buildings, sidewalks or parking lots. To achieve the best result, however, more than high pressure is needed. It also requires the correct equipment, the right technique, and safety precautions.

  1. Selecting The Right Equipment

The type of equipment used will determine the effectiveness. Consider the following factors:

  • Levels of Pressure: The pressure levels in commercial pressure washers are typically between 2,000 and 4,000 PSI (pounds/square inch). High PSI pressure is recommended for harder surfaces and tougher staining, while low PSI pressure is preferred for delicate surfaces.
  • Nozzles: Different nozzles offer a wide range of spray patterns. Use the wide angle for general cleaning and the narrow-angle for tough stains.
  1. Clean Your Home With The Right Cleaning Products

Water alone can remove some dirt but using the correct cleaning solutions will increase the effectiveness of pressure-washing. There some information that you should be aware of.

  • Organic Detergents: These biodegradable detergents are both environmentally friendly and efficient at removing dirt and organic material.
  • Degreasers: Ideal for areas with oil stains and grease, such as loading docks or parking lots.
  • Removing Mildew and Mould: Essential for humid environments like Atlanta, where molds and mildew can flourish.
  1. Stains That Require Pre-Treat

A pre-treatment with the cleaning solution of your choice can make a huge difference for heavily soiled spots or stubborn stains. Allow the solution a few minutes before pressure-washing to break down grime.

  1. Following a Systematic Process

In order to get a thorough cleaning with pressure washing, it is important to use a systematic method.

  • Work your way Down: Begin by washing from the highest point of the building. This stops the dirty water from dripping over already-cleaned surfaces.
  • Use Overlap Strokes: By using overlapping strokes, you will be sure to clean all areas and ensure there are no missed spots.
  • Maintain a Consistent Distance: Keep the nozzle away from the surfaces to avoid streaking.
  1. Safety Is Important

Not doing pressure washing properly can lead to serious injuries. There are safety tips.

  • Beware of electrical hazards: Avoid spraying outlets, wiring, or fixtures.
  • Be Cautious When Using Ladders: It can be dangerous to pressure wash from a rung of a ladder. Use extension wands, or hire professionals to clean high areas.
  1. Environmental Impact

Atlanta is a big city. Being environmentally conscious in this city is vital. There are guide on how to minimize the negative environmental effects of pressure cleaning:

  • Contain Runoff: Make sure the water runoff is not entering storm drains. It can lead to pollution. Manage runoff by using barriers and containment systems.
  • Water Recycle: If possible, you should use a water reclamation system.
  1. Experts: When To Hire Them

While you can perform small jobs yourself, it is often necessary to hire a professional for larger commercial properties. 

  • Efficiency And Expertise: Professionals can handle large spaces with ease. They have the expertise and equipment.
  • Better End Results: These professionals know how to clean different surfaces, stains and surfaces with the appropriate cleaning products and techniques.
  • Safety. Professionals receive training to safely handle equipment, reducing accident risk.
  1. Schedule Regular Maintenance

Maintaining the curb appeal of your property necessitates consistent pressure cleaning. Your property’s maintenance needs will determine your schedule.

  • High-traffic areas: Sidewalks, entryways, and parking lots can need more frequent cleaning.
  • Pressure Washing: During or after the season of pollen, heavy rainfall, or other seasonal events, which can cause increased dirt and grime accumulation, schedule Atlanta pressure washing.


Effective commercial power washing is critical for maintaining the cleanliness and safety of your property. With the right tools, appropriate cleaning agents, and a systematic process, you can get excellent results. These tips are especially important for businesses in Atlanta, due to its climate and urban environment. It doesn’t matter whether you use professionals to do the job or if it is done in-house, regular Maintenance of your property will keep it looking its best. This will create a positive impact on clients and potential customers.

Recent Posts

Douglas S. Pittman Written by: